Production Tips

How to create 3D mixes
distortion

How to create 3D mixes

#AudiotentTip 83. Three Dimensional Mixes.To create deep, three dimensional mixes try to use contrasting sounds. For example;Your mix is full of reverb - add something completely dry, without any s...

de-esserHow to use a De-Esser

How to use a De-Esser

#AudiotentTip 82. DeEsser.If your sound has excessive frequencies between 2-10 kHz a De-Esser might just be the tool to help tame the sibilance.A De-Esser is essentially a dynamic processor which w...

exciterAdding Harmonics with Exciters

Adding Harmonics with Exciters

#AudiotentTip 81. Exciter.For a harsh sound, apply tape saturation to shelve high frequencies, then re-introduce pleasing high harmonics via exciters such as Waves Apex Aural Exciter or iZotope Ozo...

saturationTaming high frequencies with Tape Saturation

Taming high frequencies with Tape Saturation

#AudiotentTip 80. Tape Saturation.Sounds with a bright character or sharp transient could benefit from the use of tape saturation.This tends to help tame the high frequencies and is more pleasing t...

re-samplingRe-Sampling Techniques

Re-Sampling Techniques

#AudiotentTip 79. Re-Sampling.Once you’re happy with your synthesised sound, bounce to audio.Re-import the stem into your sampler of choicePlaying a new midi from the sampler will introduce artefac...

genresBe inspired by other genres

Be inspired by other genres

#AudiotentTip 78. Be inspired by other genres.Step outside your comfort zone and listen to other genres.This can get you inspired and helps you learn some of the techniques that you wouldn’t discov...

chordsTips for layering chords

Tips for layering chords

#AudiotentTip 77. Layering.Try using a different synth patch for each note of your chord. This can naturally add separation to your instruments without the use of EQ.

group busGroup Bus

Group Bus

#AudiotentTip 76. Group Bus.Add your individual synth, drum, fx sounds to a dedicated group bus. Process that bus to make your group sound as a coherent instrument.

FXPre-Fader FX

Pre-Fader FX

#AudiotentTip 75. Pre Fader FX.Use a pre-fader send if you want your FX to stay at a consistent level, independent from the dry signal. For example if you have a reverb on your send, you can fade o...

advanced sound designCarving space for your kick drum with sound design

Carving space for your kick drum with sound design

#AudiotentTip 74. Inverted Phase Technique.To reduce the fundamental frequency of the Saw/Square waveform, add another oscillator with a pure sine and invert it 180 degrees. This works great for ca...